Below are several different videos that will help you learn how to set up different kinds of water features....Enjoy!
Disappearing Basin Installation
Quick & Easy One Afternoon Water Feature
Complete Pond Installation
Learn how to install your backyard paridise this weekend. This video is complete with step-by-step instructions including the install of a skimmer and biological waterfall.
Part 1. See below for Part 2
Part 2. MicroPond Instalation
Create a beautiful LED lighted waterfall indoors or out....even on your pool or spa
Check out this video on the Clean Rain Ultra Downspout Diverter. The all in one rainwater filtration & collection system available at BDR Ponds.
Check out this video on how to convert your wet/dry vacuum into a pond vacuum and clean out a pond without loosing the water.
BDR POTTERY BASIN (BASIC SETUP)
DIG HOLE FOR THE DIMENSION AND DEPTH OF THE BASIN THEN PLACE INTO HOLE MAKING SURE THAT BASIN IS AS LEVEL AS POSSIBLE
PLACE PUMP DOWN INTO BASIN AND RUN CORD OUT THE SMALL SLIT IN THE DOOR TO YOUR ELECTRICAL OUTLET (DO NOT PLUG IN YET)
CONNECT THE HOSE TO THE PUMP WITH CLAMP & RUN THE HOSE OUT OF THE HOLE THAT GOES FROM PUMP AREA UP ONTO THE UPPER LEVEL OF THE BASIN ITSELF
RUN HOSE ALONG ANY CHANNEL ON TOP OF THE BASIN TO REACH THE UNDERNEATH OF THE POTTERY AND CONNECT HOSE TO THE ELBOW THAT IS TO BE SCREWED INTO THE FITTING PROVIDED WITH THE POTTERY
LEVEL POTTERY WITH CEDAR SHIMS (NOT PROVIDED) OR SOMETHING SIMILAR UNTIL THE POTTERY IS LEVEL
IS YOU HAVE A SPRAY STEM (PVC PIPE) INSIDE OF YOUR POTTERY YOU MAY NEED TO CENTER IT USING A SMALL PIECE OF LUMBER,SHIM, OR BRICK SO THAT THE SPRAY IS DEAD CENTER
ADD ROCK AROUND POTTERY TO COVER EXPOSED BASIN AND ADD WATER UNTIL THE BASIN IS FULL
PLUG IN PUMP AND ADD WATER TO THE BASIN AS THE WATER IN THE BASIN WILL NEED TO FILL THE POTTERY LEAVING THE BASIN WATER LEVEL LOWER THAN WHEN YOU FIRST PLUGGED IN PUMP